J-USBC
USB-C
Connector
USB Type-C receptacle
Power input
About this component
The main power input; Raspberry Pi asks for a 5 V supply rated at 3 A (2.5 A is fine if USB devices draw under 500 mA in total). Absolute maximum input is 6 V. On the first board revision, the CC pins shared one pull-down resistor, so some electronically marked USB-C cables would not power the board; this was fixed in revision 1.2.
What it does on this board
5V USB-C power connector.
Pinout & readings
No pinout or reference readings yet — these show what each pin does and what a healthy part should measure.